Overspill and Overfill Prevention Systems LRC Level Remote Control - Radio controlled overfill prevention LRC CHARGER Produkte Produktvermischungsschutz-Systeme
Petroleum companies and hauliers want to prevent product mix and overfilling, which occurs when unloading the tank truck at the petrol stations or when loading at the loading facilities. As a result, oil companies and hauliers are eliminating the tremendous costs and burdens associated with crossfill and overfill accidents to protect their reputation and brand.
The complete system "SECU Multi Tank" contains all components for the fuel delivery, starting with the loading of the tank truck at the gantry until the fuel is unloaded at the filling station. Quality assurance (Cross-Fill-Prevention), overfill prevention, vapour recovery and grounding control are integrated. Faulty refueling and environmental damage caused by overfilling are thereby not possible.
At the petrol station, a SECU MultiPID or SECU SinglePID is installed (depending on whether it is a central filling or single filling shaft).
The corresponding product code can be programmed directly at the petrol station and during installation with the PC via an EX-approved interface adapter or with the SECU PID Tester. Each coupling is isolated from earth and a ground connection is made via the respective PID.
The installation is very simple and requires no power connection in the filling shaft.
The programming can be stored on the PC and is available for later retrieval
in case of a product change.
The earthing clamp on the tank truck will continue to be used as usual.
Vapour recery connections can also be monitored.
Possibility for later upgrade to an electronic overfill prevention:
SECU MultiPower is already equipped with switching amplifiers for the connection of cable overfill prevention (up to 6 channels are available in 1 MultiPower). Therefore, no additional switching amplifiers are needed on the tank truck.
The tanks at the petrol station must be equipped with electronic limit probes and connections.
Or you better use -
SECU O2 PID - if you choose crossfill prevention and electronic overfill prevention, this is the optimal, innovative solution. O2-PID is a combination of both solutions in 1 system.
When using the O2 PID in your service station tank , both the product crossfill prevention information and the overfill prevention information are routed through the conductive hose to the tank truck controller. There are no further cable connections between tank truck and petrol station needed.
Another option for overfill prevention is provided by the SECU Multiplexer in the filling shaft of the filling station. It can manage up to 6 electronic overfill prevention devices and process it from the tank truck to the filling station with only 1 cable connection. This cable also provides a perfect ground connection.
As an option for electronic overfill prevention, data from existing Level Gauging systems can also be analyzed with the SECU Multiplexer.
SECU MultiPID, SECU Single PID, SECU O2 PID and SECU PID testers do not require power and are ATEX certified.
The system is designed according to EN14116 or EN13616, so that the vehicle electronics from other manufacturers can also evaluate the PID and overfill prevention information accordingly.
The ATEX Approved SECU PID Tester is designed to verify proper installation and programming of the SECU SinglePIDs and SECU O2 PIDs and is perfectly suited for service and maintenance purposes.
The ATEX certified SECU USB / 232 adapter is used to (re) program the SECU MultiPIDs in the EX zone. The data of the petrol station can be stored on the PC and re-read or retrieved and changed.
Petroleum companies and hauliers want to prevent product mix and overfilling, which occurs when unloading the tank truck at the petrol stations or when loading at the loading facilities. As a result, oil companies and hauliers are eliminating the tremendous costs and burdens associated with crossfill and overfill accidents to protect their reputation and brand.
The complete system "SECU Multi Tank" contains all components for the fuel delivery, starting with the loading of the tank truck at the gantry until the fuel is unloaded at the filling station. Quality assurance (QSS), overfill prevention (AS) and grounding control are integrated. Faulty refueling and environmental damage caused by overfilling are thereby not possible.
The central control unit of the SECU MultiTank system is located on the tank truck. There it is decided whether a release for loading and unloading can be given.
The tank truck compartments can be filled with different products at each loading, unless there is still residual product from the last delivery in the compartment.
Loading arms usually carry the same product (or the same products) and rarely change, as well as the tanks at the petrol station.
SECU MultiTank must ensure that no crossfill and overfill can happen, neither during loading at the gantry nor during unloading at the petrol station. This is done by comparing the product codes with the product code in the compartment, the loading and unloading will not be released if it is not the same product. Of course, empty chambers can be filled with another product. But as soon as there is a residual quantity left in the compartment from the last delivery, the release will only take place if the same product is assigned to the loading arm. At the petrol station, the connection of the respective tank is also compared to the product code of the PID at the corresponding petrol station coupling, and released only if the product codes are identical. Otherwise, the bottom valve on the vehicle remains closed until the operator has made the correction accordingly. The error display can be read on the LCD display of the SECU MultiTerm. The product codes are transmitted via the conductive hose (with the SECU O2-PID also the information on overfill prevention) or via the conductive loading arm. At the same time, the vapor recovery connections and the earthing connections are monitored. If these are not in order, there will be no release.
By integrating the SECU MultiGPS, the position of the tanker can be stored and controlled along with every action of the driver. This data allows complete control of the logistics chain for quality control.
This data can be read out directly from the SECU MultiTerm or transmitted to the tank truck via an interface to the on-board computer system or via a modem and evaluated via a corresponding data management program. The system can also evaluate various other sensors on the tank truck and thus transmit additional information about the tank truck itself and the status of the respective units in real time and location.
Thus, every action of the driver on the tanker can be monitored in real time and with position determination and unauthorized accesses can be recognized immediately. This is presented in a specially developed graphical design in the data management program.
Using the sealed parcel delivery feature provides control and control of the entire logistics chain, such as email alerts, live tracking, and geo-fencing.Everything in a mature data management program. (see Anti-Theft Systems (Sealed Parcel Delivery SPD)
